PREVIOUS: Automation

Overview Display

The overview display is an external display that can be connected to the VGA on the rear of the console.

An external touch screen can also be used. This must be SSL Part no. 45VTE22F. Please contact SSL for more information on purchasing this screen.

If using an external touch screen, connect the console's Monitor output to the screen via VGA. Now connect the screen's USB port to one of the console's USB Extender ports using a USB 2.0 A to B cable

Two different pages can be displayed on the overview screen. The first is the overview screen, which provides an overview of the settings and signal levels of each path. The other is the automation screen, allowing you to see the list of scenes and other automation related information.

You can choose which page is sent to the external overview display from the options menu. See Setup:Console and User Options for more details.

Overview Screen

The overview shows all of the paths in miniature. The paths are arranged by their system layers (see Tutorial: Fader Layers) so are not necessarily related to the user layout on your Fader Tiles. They are ordered as follows:

  1. Channels
  2. Stems
  3. Auxes
  4. Masters
  5. VCA's
  6. Matrix outputs
  7. Talkback paths
  8. Solo outputs

It is also possible to view the overview in the main screen by selecting it from the main menu:

Note: Overview can only be displayed in one screen at a time, so it will be removed from the external overview screen if selecting it to the main screen.

If you touch a channel on the screen, it becomes the selected channel, and can be manipulated using the Master Tile Focus Fader.

Double-tap the meters area to expand the meters (just like in the channel view screen). This hides all information under the meters except the name, colour, Mute, Solo and Select status.

Double-tap them again to minimise the meters and return to the previous view.

Notes:
Fader Tile layouts will not change if selecting channels from the overview screen, but it will highlight the channel's Select button if it happens to be visible on a Fader Tile. Conversely, if you select a channel using the Fader Tile Select buttons, the same channel will become selected in the overview screen.
When a mouse is plugged into the console, you can control basic channel functions using the buttons on the screen, including double-clicking the meters to expand or contract them.

Tip:
When input channels clip, they flash red in the Overview page. Displaying the Overview page on an external touch screen allows the operator to quickly identify clipping channels and tap them to select, without having to navigate away from the Channel View on the Main Screen.
Another tip:
Use the Overview screen to select multiple paths for use with Path Linking or Copy.

Automation

The other page that can be shown on the external display is automation.

The top half of this page contains a list of all the scenes in your showfile. The bottom half can display a number of things, selected from the buttons in the lower left corner of the screen. Since the external screen is not touch-sensitive, you should decide what to view in the lower half of the screen (e.g. Scene Name to view the name and notes for the selected scene) before you assign it to the external display.

Alternatively, use a USB mouse to change the selection and navigate the automation screen at any time.

Note: Automation can only be shown on one display at a time, so it will be removed from the external display if selecting it on the main screen.

Congratulations on completing the tutorial!

To explore functions in more detail, please see the Operator's Reference section at left or view the index.