PREVIOUS: Remote Options

The Options can be found in MENU > Setup > Options.

The following pages detail the settings in each Options tab:
CONSOLE Options
SYSTEM Options
SURFACE Options
USER Options
REMOTE Options
NETWORK Options (this page)

Network Options

These settings relate to the console's local network and Dante IP configuration.

Network Options are found in MENU > Setup > Options > NETWORK tab.

Double tap on any field to edit it.

This page contains IP settings for the following console network devices:

Connectivity Network

Used for remote control of the console via SOLSA, the Remote Expander, another SSL Live console or TaCo. This network is accessed from one of the three ports labelled NETWORK on the rear of the console.

To connect a device to the Connectivity network, that device must have an IP address in the same subnet as the subnet listed for the Connectivity network on this page.


Primary Dante Control - Provides the primary connection for control over the Dante network including making/unmaking routes and controlling input parameters such as mic gain.

Secondary Dante Control - Provides the secondary connection for control over the Dante network.

To use Dante on the console, the primary and secondary IP addresses of the console's Dante Control must be in the same subnets as the other devices on the Dante network. The primary and secondary Dante networks must have different subnets.


All three of the console's network devices (Connectivity network, Dante Primary Control and Dante Secondary Control) must all have IP addresses in different subnets.

Please Note: If any of these console network devices are set to DHCP and there is no DHCP server on that network, the IP address will be auto-configured within the 169.254.x.x subnet. If more than one of these console network devices are set to DHCP and there are no DHCP servers on those networks, those network devices will all be auto-configured with an IP address within the 169.254.x.x subnet. This will link the networks, which is an invalid configuration. For this reason, SSL recommends that a Fixed IP address is used if a DHCP server is not available.

For more information on Dante IP configuration please see Setting Up Dante.

For more information on connecting remote surfaces or TaCo to the Connectivity network please see Remote Surfaces and TaCo Tablet Control.


IP Address Clash Warnings

IP Address clash warnings have been added to the Network Options (MENU > Setup > Options > NETWORK tab) to notify of when multiple network adapters on the console have IP addresses within the same subnet.

The adapters with IP addresses that need changing will be highlighted in red.

A status message will also appear.





And a network error icon will appear in the status bar.






The warnings will appear when an adapter's IP address is changed to within the same subnet as another adapter. If these warning messages appear, the current configuration of the console's network adapters is invalid and the IP addresses of the appropriate network adapters must be changed to resolve the clashes.

The warnings are organised by priority in the following order:

  1. Dante Control Primary
  2. Dante Control Secondary
  3. Connectivity Network

So for example, if the IP address of the Connectivity adapter was set within the 169.254.x.x subnet, and the user also set Dante Control Primary's IP address within the 169.254.x.x subnet, the warning would appear on the Connectivity adapter, as it is lower priority.

When the IP address clash has been resolved, the network error icon will disappear and the following status message will appear:





Useful Links

CONSOLE Options
SYSTEM Options
SURFACE Options
USER Options
REMOTE Options
Faders
Metering
Solos
Clocking The System
Index and Glossary
NEXT: Remote Surfaces